BCFPD - ROYAL M6605 PART A (FORMERLY P-195)
- MSDS: BCFPD
- Manufacturer: UNIROYAL INC ADHESIVES AND SEALANTS DEPARTMENT
- Product Name: ROYAL M6605 PART A (FORMERLY P-195)
- National Stock Number: 8040-00N000487
Product Identification
Product ID:ROYAL M6605 PART A (FORMERLY P-195)
MSDS Date:01/01/1985
FSC:8040
NIIN:00N000487
MSDS Number: BCFPD
Responsible Party
Emergency Phone: (219)256-8222
Cage: GO875
Contractor
Cage: GO875
Ingredients
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 41%.
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 14%.
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
VEHICLE
Fraction By Weight: 45%.
Hazards
Effects of Overexposure:IRRIT.EYES,NOSE,THROAT.REPEATED
EXPOS:HEADACHE,DIZZ,FATIGUE,SLEEPINESS,IRRIT,NAUSEA,NARCOSIS.
First Aid
First Aid:INHAL:REMOVE TO FRESH AIR. SKIN:REMOVE FRM SKIN W/MILD
SOLVENT;THEN FLUSH W/SOAP&WATER,THEN USE SKIN CREAMS OR EMOLLIENTS.
IF SPLASHED IN EYES, FLUSH W/WATER AND CALL PHYSICIAN IMMEDIATELY.
Fire Fighting
Flash Point:45F TCC
Lower Limits:1.0
Upper Limits:7.0
Extinguishing Media:CO OR OTHER MEDIA SUITABLE FOR SOLVENT FIRES.
Unusual Fire/Explosion Hazard:FLAMMABLE-STORE&USE AWAY FROM SOURCES OF
HEAT, FLAME, 0R SPARKS.
Accidental Release
Spill Release Procedures:WIPE UP SPILL WITH WASTE. TRANSFER MATERIAL
FROM LEAKING CONTAINERS TO AIR TIGHT METAL CONTAINERS.
Handling
Handling and Storage Precautions:FLAMMABLE, STORE AND USE AWAY FROM
SOURCES OF HEAT, FLAME, & SPARKS.VAPORS MAY CAUSE FLASH FIRES.CLOSE
CONTAINER AFTER USE.
Other Precautions:USE WITH ADEQUATE VENTILATION.AVOID PROLONGED OR
REPEATED CONTACT W/SKIN.AVOID PROLONGED BREATHING OF VAPORS.KEEP
OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:NOT REQ. IF MECH. VENTILATION SUFFICIENT TO KEEP
BELOW TLV.
Ventilation:MECHANICAL-SUFFICIENT TO KEEP BELOW TLV.
Protective Gloves:POLYETHYLENE
Eye Protection:GLASSES OR GOGGLES REC.
Other Protective Equipment:SKIN CREAMS OR EMOLLIENTS USEFUL.
Supplemental Safety and Health
MFG LISTS VPR PRESS. TO BE 10 TO 36.7 MM AG, AND VPR DENSITY TO BE 2.5
TO 3.66.
Chemical Properties
Boiling Pt:B.P. Text:232F
Spec Gravity:1.055
Evaporation Rate & Reference:4.5 TO 9.2 ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:THIN,BLACK LIQ.W/STRNG AROMATIC HYDROCARBON ODOR.
Percent Volatiles by Volume:55.
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:BURNING OR BURIAL IN ACCORDANCE W/LOCAL, STATE,
OR FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.